Root Ripper For Mini Excavator

Root ripper for mini excavator is a front‑end attachment for excavators. It runs on the excavator’s hydraulic power. Its teeth are strong, wear‑resistant and impact‑proof. It works for frozen soil, weathered rock and hard soil layers. It can also remove hard ground materials. It is easy to install and take off. Compared with breakers, it fits better for loosening soil and soft rock. It quickly breaks hard ground. It reduces equipment wear and improves earth‑moving efficiency.

Get a Free Quote Now

Technical Specifications – Find Your Exact Model

All root ripper for mini excavator models are listed below. Choose based on your excavator weight and required ripping depth.

Category	Unit	YG-00	YG-01	YG-02	YG-04	YG-06	YG-08	YG-08S	YG-10	YG-14	YG-17	YG-20
Total Length A	mm	523	523	656	656	885	1080	1080	1290	1290	1500	1550
Width B	mm	130	130	180	180	240	345	345	400	400	465	465
Thickness F	mm	36	36	55	55	80	90	90	90	110	110	110
Carrier	Ton	1-2	3-4	4-6	6-9	12-16	20-23	23-26	26-30	30-40	40-52	50-90
Weight	kg	30	40	80	85	185	400	410	600	760	1030	1200

Key takeaway: The machine thickness ranges from 36mm to 110mm – thicker means stronger, suitable for heavier machines and harder materials. The mini excavator ripper for sale in the 1-9 ton range (YG-00 to YG-04) is lightweight yet tough enough for most utility jobs.

Get a Free Quote Now

Why Choose a Root Ripper for Mini Excavator?

1. One Tooth Beats a Bucket Full of Teeth

A standard bucket distributes force across multiple teeth. A hydraulic excavator ripper concentrates all the machine’s hydraulic power into a single, sharp point. This delivers far higher ground penetration force – up to 3-5 times more than a bucket.

For hard clay, frost, or compacted fill, the root ripper for mini excavator breaks through where buckets fail.

2. Save Time and Fuel

Ripping is faster than hammering. A mini excavator ripper for sale can break a cubic meter of frozen ground in seconds – a breaker takes minutes. Less machine time means lower fuel consumption and faster project completion.

3. Reduce Wear on Your Excavator

When a bucket bounces, shock loads transfer to the boom, arm, and pins. The root ripper for mini excavator engages smoothly – it rips rather than pounds. This reduces stress on the carrier machine, extending its service life.

4. Versatile Across Many Models

From the compact YG-00 (1=2 ton carrier) to the massive YG=20 (50=90 ton carrier), there is a hydraulic excavator ripper for every size class. The 11 models cover nearly every excavator on the market.

5. Simple, Robust Construction

No complex hydraulics. No moving parts. Just a forged steel shank with a replaceable tip. This mini excavator ripper for sale requires minimal maintenance – just check the tip for wear and replace when needed.

factory photos of excavator ripper attachment

Find The Right Solution For Your Job

Applications – Where the Hydraulic Excavator Ripper Excels

1. Land Clearing and Site Preparation

Tree roots, stumps, and brush are no match for a root ripper for mini excavator. Rip along the root line to sever major roots, then pop the stump out. Works faster than a stump grinder on large roots.

2. Trenching for Utilities

Frozen ground or rocky soil stops a standard trenching bucket. The machine breaks the hard layer first, then a clean-out bucket removes the spoils. Perfect for water lines, gas pipes, and cable trenches.

3. Agricultural and Forestry Work

Breaking hardpan layers in fields, ripping compacted forest roads, or preparing planting rows – the mini excavator ripper for sale is a farmer’s best friend. The YG-00 and YG-01 models are light enough for compact tractors with backhoe attachments.

4. Demolition of Light Concrete and Asphalt

While not a breaker, the root ripper for mini excavator can crack thin concrete slabs, asphalt pavements, and masonry walls. Use it for selective demolition where you want to avoid vibration.

5. Quarry and Mining Support

In larger operations, the YG-14, YG-17, and YG-20 hydraulic excavator ripper models serve as primary ripping tools for soft rock, weathered shale, and overburden removal – reducing the need for drilling and blasting.

Share Your Site Conditions With Us

How to Select the Right Model?

Follow this simple 3-step guide:

Check your excavator weight – Match the “Carrier Ton” column. For example, a 5-ton mini excavator uses YG-02 or YG-04. A 25-ton machine uses YG-08S.
Consider the material – Thicker rippers (90- 110 mm) handle harder materials. For soft clay or topsoil, the 36- 55 mm models are sufficient.
Think about reach – Total length A affects how far the ripper extends from the bucket pin. Longer models (1500mm+) give more reach for deep ripping but require heavier carriers to balance the leverage.

Get Your Project‑Specific Quote

Get Your Mini Excavator Ripper for Sale Today

Stop fighting with frozen ground and stubborn roots. The root ripper for mini excavator is the simplest, most cost-effective attachment you can add to your fleet.

We offer: