Rail Shear | 30-38T Excavator Mounted

Rail shear is a powerful hydraulic shear attachment that mounts on your excavator. It cuts through heavy railway rail, steel beams, rebar, and structural steel with brute hydraulic force – cold cutting, no sparks, no slag, no gas. The excavator demolition shear delivers clean, square cuts in seconds.

View Full Technical Details

Technical Specifications – YGRS350 Rail Shear

All key parameters for the rail shear model JSRS350 are listed below.

Item/Model	Unit	YGRS350
Suitable Excavator	T	30-38 (Short Arm) / 20-38 (Long Arm)
Carrier Weight	kg	3800 (Short Arm) / 4200 (Long Arm)
Opening	mm	211
Cutting Depth	mm	195
Height	mm	2675
Width	mm	810
Driving Pressure	kgf/cm²	320-350
Cutting Force	ton	1350
Max Cutting Material Size	kg/m	60kg/m Heavy Railway Rail

Receive Detailed Parameter List

Why Choose YG Excavator Demolition Shear?

1. Cold Cutting – No Sparks, No Fire Risk

Unlike oxy-fuel torches, the rail shear cuts cold. There are no sparks, no open flames, and no heat-affected zones. This is critical for:

Railway sites where fire risk must be minimized
Scrap yards processing materials with residual fuels or oils
Demolition sites near sensitive structures or flammable materials

The excavator demolition shear eliminates the fire hazard that comes with torch cutting – keeping your crew and site safer.

2. Clean, Square Cuts – No Slag, No Grinding

Torch cutting leaves rough edges covered in slag – requiring additional grinding or cleaning before scrap processing. The machine produces clean, square, burr-free cuts – ready for sorting, baling, or direct sale to mills. This saves labor and increases the value of your scrap.

3. 1350 Tons of Cutting Force – Handles 60kg/m Rail

The machine delivers 1350 tons of shearing power. This is more than enough for:

60kg/m heavy railway rail
Steel beams and columns
Rebar and reinforcing steel
Thick plate and structural sections

The shear cuts through the hardest rail steel in seconds – not minutes.

4. Dual Arm Configuration – Short or Long Arm

The rail shear offers two mounting options:

Short Arm (30-38T) – Maximum cutting force, ideal for heavy-duty rail and steel cutting
Long Arm (20-38T) – Extended reach, perfect for working in rail beds and hard-to-reach positions

This flexibility means you can mount the machine on the excavator you already own – 20 to 38 tons with long arm, or 30 to 38 tons with short arm.

5. Compact and Powerful – 211mm Opening, 195mm Depth

With a 211mm jaw opening and 195mm cutting depth, the rail shear grips and cuts even the largest rail profiles. The compact dimensions (2675mm height, 810mm width) allow operation in tight spaces – rail corridors, tunnels, and congested demolition sites.

6. Durable Construction – Built for Continuous Operation

All rail shear models feature:

High-strength steel housing
Hardened, wear-resistant shear blades
Heavy-duty pivot pins and bearings
Reinforced hydraulic cylinder

With proper maintenance, the demolition shear for sale delivers years of reliable service in the most demanding rail and demolition environments.

Find The Right Solution For Your Job

YG Steel Rail Track Shear 4 Applications

Railway Track Dismantling and Recycling: The primary application – cutting heavy railway rail into manageable sections. The machine processes 60kg/m rail quickly.
Demolition and Scrap Processing: Steel structures, bridges, and industrial plants – the machine cuts.
Scrap Yard Processing: End-of-life vehicles, white goods, and mixed scrap – the machine sizes material for shredders or balers. The clean cuts improve throughput and reduce wear on downstream equipment.
Bridge and Infrastructure Dismantling: Rail bridges, highway structures, and port facilities – the machine cuts structural steel in place, reducing the need for torch cutting and minimizing fire risk on critical infrastructure projects.