The following is a real-world case study of YG’s excavator scrap shear, covering the Azerbaijani background, the challenges faced, YG’s solution, the effectiveness of the scissors, and customer feedback.
Background: In the rapidly developing region of Azerbaijan, a demolition and scrap processing contractor was facing a growing challenge. The country was in the midst of a major infrastructure transformation. The Metro Green Line expansion project, covering approximately 8 kilometers of twin-bore tunnels with four underground stations, was moving forward. The Railway and Bus Terminal Complex, covering 6.4 hectares with bridges, overpasses, and crossings, was scheduled for implementation between 2025 and 2026. A new international airport was being commissioned. A tram system was in the planning stages. Across all these projects, old structures were being demolished, steel was being cut, and scrap was piling up.
The contractor was involved in multiple demolition and recycling projects, processing steel beams, rebar, pipes, and structural sections from demolished buildings and infrastructure. The traditional methods the team had been using—torch cutting and manual shears—were slow, labor-intensive, and posed significant safety risks. Each steel section took 15 to 20 minutes to cut, and the quality of the cuts was inconsistent. With demolition waste and scrap metal recycling demand growing across the country, the contractor needed a faster, safer, and more efficient solution.
Customer selection: After extensive research, the team purchased an excavator scrap shear from YG Machinery—specifically the YG980RT model designed for 91-110 ton excavators with arm installation. This machine features a 950mm maximum opening, a 940mm cutting depth, and delivers 1350 tons of cutting force with a 320-350 bar working pressure. The attachment is specifically engineered for heavy-duty steel cutting in demolition and recycling applications.
Overview of usage effects: The impact was immediate. The Azerbaijani crew now cuts through steel beams and structural sections in under five minutes per cut—a 70% reduction in processing time. The machine delivers clean, precise cuts with no burrs or deformations, eliminating the need for secondary finishing. The project was completed ahead of schedule, and the contractor has since purchased additional units for other demolition projects. For a free quote on a hydraulic eagle shear for your operation, contact us today.
Contact: 【WhatsApp/WeChat/Phone】+86 159 3715 3321
Technical Parameters Of YG Excavator Scrap Shear
Below are the key specifications for the YG series excavator scrap shears. The Azerbaijani contractor chose the YG980RT model for its exceptional cutting capacity.
| Item/Model | Unit | YG180RT | YG280RT | YG330RT | YG380RT | YG430RT | YG480RT | YG580RT | YG780RT | YG980RT |
| Arm Installation | ton | 13–17 | 18–27 | 25–35 | 28–39 | 40–50 | 42–50 | 51–65 | 68–90 | 91–110 |
| Boom Installation | ton | 10–12 | 14–18 | 20–28 | 20–28 | 28–39 | 28–39 | 40–50 | 51–65 | 66–90 |
| Working Pressure | bar | 250–300 | 250–300 | 300–320 | 320–350 | 320–350 | 320–350 | 320–350 | 320–350 | 320–350 |
| Working Flow | lpm | 90–110 | 180–220 | 200–250 | 200–250 | 250–300 | 250–300 | 275–375 | 500–600 | 600–700 |
| Weight | kg | 1100 | 2100 | 3000 | 3500 | 4500 | 4600 | 5800 | 7800 | 9800 |
| Rotating Flow | lpm | 30–40 | 30–40 | 30–40 | 30–40 | 30–40 | 30–40 | 30–40 | 50–60 | 55–65 |
| Rotating Pressure | bar | 90–100 | 100–115 | 100–115 | 100–115 | 100–115 | 100–115 | 100–115 | 140–150 | 170–190 |
| Opening | mm | 375 | 485 | 595 | 620 | 700 | 740 | 780 | 860 | 950 |
| Cutting Depth | mm | 395 | 525 | 630 | 600 | 720 | 750 | 780 | 850 | 940 |
| Length | mm | 2100 | 2700 | 3200 | 3280 | 3700 | 3800 | 4000 | 4300 | 4600 |
Why the YG980RT hydraulic eagle shear suited the Azerbaijani demolition project:
- 950mm maximum opening – wide enough to grip and cut large steel beams and structural sections in a single bite.
- 940mm cutting depth – allows complete severing of heavy sections in one operation.
- 1350 tons cutting force – delivers exceptional power to cut through the toughest steel.
- 320-350 bar working pressure – provides consistent, powerful cutting performance.
- 9800kg carrier weight – well-balanced on the 91-110 ton excavator, maintaining stability during heavy cutting.
- 600-700 lpm working flow – matches the large excavator’s hydraulic system for optimal performance.
- 55-65 lpm rotating flow – enables precise positioning of the hydraulic eagle shear for accurate cuts.
Three Challenges That Made Steel Cutting Difficult In Azerbaijan
The Azerbaijani demolition contractor faced three problems common across the country’s construction and demolition sector.
Problem 1: Slow Manual Cutting Methods
Torch cutting and manual shears took 15 to 20 minutes per steel section. With demolition waste from major infrastructure projects like the Metro Green Line expansion and the Railway Terminal Complex piling up, the contractor was falling behind schedule.
Problem 2: Inconsistent Cut Quality
Torch cutting produced rough, uneven edges that required secondary finishing. Manual shears caused deformation and burrs on the steel ends. The contractor was spending significant time on rework and quality control.
Problem 3: Safety Risks
Torch cutting posed fire hazards and required extensive protective equipment. Workers were exposed to sparks, heat, and toxic fumes. The contractor was concerned about worker safety and potential project delays from safety incidents.
The excavator scrap shear solved all three.
Find The Right Solution For Your Job
How YG Hydraulic Eagle Shear Transformed The Azerbaijani Operation
The YG980RT excavator scrap shear operates on a powerful hydraulic principle. Mounted on the excavator arm, the attachment uses the machine’s hydraulic system to power its massive jaws. The operator positions the jaws around the steel section and engages the shear. The jaws close with tremendous force, cutting cleanly through the material in seconds. The eagle-shaped jaw design provides exceptional leverage and cutting power.
1. Dramatic Speed Increase
The Azerbaijani crew now cuts through steel sections in under five minutes per cut—a 70% reduction in processing time. The machine delivers clean, precise cuts in a single operation, eliminating the need for multiple passes.
2. Consistent, High-Quality Cuts
The machine produces clean, burr-free cuts with no deformation. The 950mm opening and 940mm cutting depth accommodate the largest structural sections, ensuring complete severing in one operation. The Azerbaijani contractor reported that rework and quality control time dropped by more than 80%.
3. Improved Safety
The machine eliminates the need for torch cutting. No open flames, no sparks, no toxic fumes. The operator works from the excavator cab at a safe distance. The contractor passed all safety inspections with no violations.
4. Versatile Applications
Beyond demolition steel cutting, the excavator scrap shear handles a wide range of applications:
- Cutting steel beams and structural sections
- Processing rebar and reinforcing steel
- Scrap metal recycling and preparation
- Vehicle and machinery dismantling
- Demolition of steel-framed structures
For a custom hydraulic eagle shear configuration based on your material type and excavator size, please feel free to contact us.
Get Your Project‑Specific Quote
Real Feedback From The Azerbaijani Demolition Contractor
After completing the demolition work, the project manager shared his results.
- Cutting time: Reduced from 15-20 minutes to under 5 minutes per cut—a 70% improvement.
- Cut quality: Clean, burr-free cuts with no deformation. Rework dropped by 80%.
- Safety: Zero incidents. The machine eliminated torch cutting hazards.
- Labor: Reduced from 6 workers to 2 (one excavator operator, one ground worker).
- Project timeline: Completed 4 weeks ahead of schedule.
- Payback: The machine paid for itself within the first two months of use.
The project manager said: “Azerbaijan’s infrastructure transformation is creating massive demolition work. With the Metro expansion, the Railway Terminal, and the new airport all moving forward simultaneously, we need to work fast. The YG980RT machine has been essential to our success. It cuts through steel beams and structural sections in under five minutes with clean, precise results. YG excavator scrap shear has transformed our demolition operations.”
An operator added: “The machine is straightforward to operate. I position the jaws around the steel, engage the hydraulic system, and the 1350-ton force does the rest. The 950mm opening and 940mm cutting depth handle the largest sections perfectly. It’s fast, safe, and reliable.”
Get Your Project‑Specific Quote
Ready To Deploy Your Hydraulic Eagle Shear In Azerbaijan?
The Azerbaijani demolition contractor proved that an excavator scrap shear delivers faster, safer, and more cost-effective steel cutting. The YG980RT machine with 1350-ton cutting force, 950mm opening, and 940mm cutting depth handles the largest structural sections with ease. The unit is built with high-strength steel, powerful hydraulic components, and durable cutting blades that stand up to demanding demolition conditions.
Azerbaijan’s construction and infrastructure sector is experiencing historic growth, with the Metro Green Line expansion, the Railway Terminal Complex, the new international airport, and the planned tram system all driving demand for demolition and recycling equipment. YG Machinery has shipped hydraulic eagle shears to customers across the region and beyond. We provide export packaging, operation manuals, and spare parts support, including replacement blades and hydraulic components.
Stop struggling with slow, unsafe torch cutting. Start cutting steel fast and clean.
【WhatsApp/WeChat/Phone】+86 159 3715 3321
Share your excavator size, material type, and project requirements. We will send you a quotation with shipping to Azerbaijan within 24 hours.
